Home
Videos uploaded by user “thepropstore”
League Of Extraordinary Gentlemen Captain Nemo's Full Size, Practical Nautilus Car
 
03:53
Set in an alternate version of the late 19th Century, The League of Extraordinary Gentlemen is a unique story featuring an odd assortment of legendary fictional Victorian characters who join up to foil "The Fantom" who is trying to start a World War. The League consists of Allan Quatermaine (Sean Connery), Captain Nemo (Maseeruddin Shah), Mina Harker (Peta Wilson), Dorian Gray (Stuart Townsend), Tom Sawyer (Shane West), Dr Jekyll (Jason Flemyng) and Rodney Skinner AKA The Invisible Man (Tony Curran). This amazing adventure came from the creative mind of Alan Moore who is responsible for some of the renowned graphic novels of recent years including V For Vendetta, Watchmen and From Hell. Although the movie is star studded and was made on a very high budget, it seems to be Captain Nemo's immense car which captured the imagination of the cinema going public. The striking vehicle was used for a number of scenes and even featured on the poster. The Nautilus Car was designed by Carol Spier and of course entirely custom made for the production. The basic starting point, the chassis, is from a Land Rover Fire Tender. A unique fibreglass body was then added and a steel sub frame then constructed in the engine bay to house the Rover V8 engine required to power it. 6 enormous wheels, measuring 28 inches (72 cm) in diameter complete the basic car. The whole car also raises and lowers itself in spectacular style via a powerful hydraulic system. It is the detail and finish on the car is what really sets it apart from any other vehicle ever seen on the silver screen. Captain Nemo, also known as Prince Dakkar, was created by Jules Verne in 1870. The classic Nemo was the son of the Raja of Bundelkund. Moore's comic book version suggests he might be a Sikh. The Hindu heritage is very prominent in the detailing and the accoutrements adorning the vehicle. To the front, either side of a vast decorative radiator grille are two representations of Ganesha, the Hindu deity. The elephant motif is repeated on the door handles. Other panels and sections all over the car feature carvings of Gods and symbols. These spectacular flourishes are finished in a gold colour dressed down by the art department to look aged and weathered. The same level of attention continues within the cockpit area with intricate mouldings and decorations throughout. The upholstery is faux light brown leather with a Silver band running along the top. The back seat is curved. The off white paint work is finished in a flat tone with a deliberately cracked and crazed finish. There are some minor repairs and changes in colour dotted around the bodywork, evidence of running repairs on-going during filming. The original hard top is no longer present. There were only 2 cars made for filming, this one is the only complete running version. The other had scaffolding permanently fixed around the seats to house the cameras for close ups on the actors. This car is spectacular. It measures 22 feet long and 9 feet wide. It is not suitable or legal for road use but the car still runs beautifully and retains most of its original functionality. The car will, according to those who have driven it, reach 80 miles an hours and will corner superbly! Since filming completed the car has featured at motor shows in Essen Germany and in London. It also starred in the famous Lord Mayors Parade in London. For more 'Extraordinary' movie memorabilia, check out the official Prop Store website: http://www.propstore.com/category/movie-props/
Views: 625419 thepropstore
Green Mile Chair
 
03:09
An interesting video from the making of The Green Mile showing the electric chair in action and how it was created. Electrify yourself with more exciting movie memorabilia props at the official Prop Store website: http://www.propstore.com/
Views: 39847 thepropstore
The Prop Store - Nostromo Project (FULL)
 
10:00
This is a 10-minute version of the work Grant McCune Design's modelers did to restore the Nostromo from the original "Alien" movie. The Nostromo is now in it's home at the Prop Store of London's LA facility. Check out phases 1 thru 4 for more detailed accounts of each phase of restoration. Explore a whole new online universe at the official Prop Store website: http://www.propstore.com/category/movie-props/
Views: 53527 thepropstore
The Prop Store Nostromo Project
 
04:57
This video documents the restoration of the original Nostromo model miniature by The Prop Store Of London For more 'out of this world' movie memorabilia, check out our official Prop Store website: http://www.propstore.com/
Views: 44517 thepropstore
The Prop Store - Nostromo Project - Phase 4 (Final)
 
03:33
This video documents the final phase of restoration of the original Nostromo model miniature by The Prop Store Of London www.propstore.com
Views: 16336 thepropstore
The Prop Store - Nostromo Project - Phase 3
 
04:05
This video documents phase 3 of the restoration of the original Nostromo model miniature by The Prop Store Of London www.propstore.com
Views: 10217 thepropstore
Lot 212 The League of Extraordinary Gentleman - Captain Nemo’s (Naseeruddin Shah) Nautilus Car
 
01:34
Captain Nemo’s (Maseeruddin Shah) hero Nautilus car from Stephen Norrington’s fantasy adventure The League of Extraordinary Gentlemen. This car was used throughout the film as the League hunted down Moriarty (Richard Roxburgh) and was also featured extensively on the film’s posters. The Prop Store Live Auction in partnership with Vue Cinemas 375 original film props and costumes available at live auction For more live auction info, visit our official Prop Store website: www.propstore.com/liveauction
Views: 43660 thepropstore
THE TWILIGHT SAGA AUCTION - Actual Jewelry from the Twilight Films
 
04:47
Register for Prop Store's The Twilight Saga Online Auction (November 6-17, 2017) today: https://propstoreauction.com/view-auctions/info/id/109/ Matt Truex and Brian Cordoba of Prop Store take a look at several pieces of prop jewelry used in the production of The Twilight saga films available in The Twilight Saga Auction. Sink your fangs into these gorgeous pieces of jewelry at Prop Store's The Twilight Saga Auction today! http://www.twilightsagaauction.com/
Views: 15176 thepropstore
The Gray - Mechanical Alpha Wolf Puppet
 
01:19
This is the original Alpha Male black wolf seen in the 2011 thriller The Grey. This is the main wolf that stalked Ottway (Liam Neeson) and his group of survivors through the Alaska wilderness, and eventually the main showdown between the alpha and Ottway in the finale of the film. This piece was used on screen with the actors, and in certain scenes the eyes were replaced with CGI to give the wolf a more menacing look. This faux wolf is made from a metal under-structure that is covered in foam and black, white and silver faux hair. This piece has a metal rod protruding from the back end that is attached to a metal base structure to hold the wolf in the upright position. Best of all this wolf features a mechanical jaw and head, that when controlled features movable ears, mouth, eyes, and the ability to move its head up and down and in the right and left positions, as well as poseable limbs and tail. This piece also features a series of tubes running into the mouth that are connected to small plastic plungers on the back end to squeeze faux blood out of to simulate a real life wolf bite on screen with the actors. The mechanics of the wolf are controlled by a series of various metal cords coming out of the back end, but are no longer in functioning order. This item measures an impressive 63" x 42" x 17" (160cm x 106cm x 43cm) and is in good condition (see photos). More items to be hunted for at the official Prop Store website: http://www.propstore.com/category/movie-props/
Views: 25074 thepropstore
Dressing with Hannibal: Suits and Straitjackets in the Hannibal: The Complete Series Auction
 
01:31
Prop Store researcher/copywriter, Brian, gives a rundown of some of his favorite Hannibal Lecter wardrobe lots being sold in the Hannibal: The Complete Series Auction at propstore.com. This collection is sure to please both Fannibals and fashionistas alike.
Views: 5536 thepropstore
FURY AUCTION Lot 50: Boyd "Bible Swan's (Shia LaBeouf) Tanker Uniform
 
01:01
Boyd “Bible” Swan’s (Shia LaBeouf) TEC 5 tanker uniform from David Ayer’s war drama Fury. As Fury’s gunner, Bible was seen dawning his tanker uniform throughout the film. The uniform consists of a tanker helmet, a pair of dog tags, green wool BDU shirt (Size 15 x 32), a green herringbone jacket (Size 38 R), a tanker jacket, tan leather gloves (Size large), a faux gold band ring, a stained leather gun holster, a dense urethane Colt M1911A1, green wool pants (size 34), a green nylon web belt with a brass buckle, a camo scarf, a pair of green nylon lace up gaiters, and a pair of leather boots . The BDU shirt features a small pouch sewn into the neck for the use of a microphone rig during production and a tag marked “B” in black ink, likely for Bible, is found on the inner right hip. The herringbone style shirt features metal buttons and cuts short at the midriff. A white tag marked “Bible” in black ink remains safety pinned to the interior neck tag. The shirts and jacket are all decorated with TEC 5 chevrons stitched into either shoulder. The included dog tags hang from a length of ball-chain and read “Boyd S Swan.” The pants are marked “231” in red ink and on an interior tag with blue ink. The included tanker helmet is constructed of a resin shell lined with leather interior and features leather ear flaps with embedded earphones. The helmet is detailed with various leather straps, metal buttons and plastic goggles lined with rubber. A length of tape inside the helmet is marked “Shia (small)” in black ink. All items in this lot have sustained grease and mud stains from production, but remain in otherwise good condition. Dimensions (helmet): 8” x 8” x 9” (20 cm x 20 cm x 23 cm) Please note that in order to conform to legal restrictions an orange plastic tip has been added after the production.
Views: 5472 thepropstore
Lot 211 The Last Samurai - Complete Ujio (Hiroyuki Sanada) Samurai Warrior Costume
 
01:37
A complete samurai costume worn by Ujio (Hiroyuki Sanada) in Edward Zwick’s period war epic The Last Samurai. Designed to replicate authentic period samurai armour, this costume consists of 17 separate pieces that are applied in layers to create a complete look. This piece will be on offer at Prop Store's live auction held on October 16th at VUE Cinemas' Westfield location, White City, London. The piece will also be on exhibition on October 1st through to the auction event. The Prop Store Live Auction in partnership with Vue Cinemas 375 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 7062 thepropstore
Cooking with Hannibal: Culinary Props and Costumes from Hannibal: The Complete Series Auction
 
02:10
Prop Store researcher/copywriter, Brian, takes Fannibals on a behind-the-scenes tour of Hannibal Lecter's kitchen. All of the items featured are currently for sale in the Hannibal: The Complete Series Auction hosted at propstore.com
Views: 4888 thepropstore
GI Joe: Retaliation - Storm Shadow Hero Linking Swords
 
01:00
A set of Storm Shadow's (Byung-huh Lee) Hero Linking Swords from Jon M. Chu's 2013 action adventure, G.I. Joe: Retaliation. In the film, Storm Shadow uses these weapons when rescuing Cobra Commander before his eventual alliance with the G.I. Joes. These hero swords were created for use in close-ups when the two swords had to be seen being functional and connecting with each other. The blades are made of polished metal and feature the Arashikage clan logo engraved in the lower portion of the blade and painted a deep red color. The guard of the both swords feature a distinct, flower-like shape with inner petals cut out. The handles feature resin white sides that have been wrapped with white leather strips in a tight braid, and a small silver button towards the end of the sword. On the longer sword, that button ejects the locking arm to join the swords together as a singular weapon. The swords show light wear from production, both with small blemishes and scratches on the blade and light damage to the braids on the handle. The pieces are still functional though and remain in great, production used condition. Become a hero today with more movie memorabilia at the official Prop Store website: http://www.propstore.com/
Views: 26590 thepropstore
Lot #490 - STAR WARS: RETURN OF THE JEDI (1983) - ILM Y-Wing Model Miniature
 
02:17
The ILM Y-Wing Model Miniature will be up for auction in the Prop Store Live Auction will take place on Tuesday September 26th 2017 at the London BFI IMAX in Waterloo, with a three-week free entry Preview Exhibition running from the 7th - 26th September. Bidding will be available online, by phone or in person and you can register to bid at propstore.com/liveauction
Views: 1128 thepropstore
Lot #98,99 BLADE RUNNER (1982) - Matthew Yuricich Matte Paintings
 
07:32
A matte painting by Matthew Yuricich from Ridley Scott’s sci-fi classic Blade Runner. Matte painting is one of cinema’s oldest visual-effects techniques, used to extend sets and create scenery for films by means of a painted image rather than a physical set. This matte painting was used for the shot in which the replicant Roy Batty (Rutger Hauer) saved Deckard (Harrison Ford) from falling off a roof. The painting is achieved using acrylic paints on a large sheet of masonite. The board features dark buildings looming over Roy Batty and Deckard, as Deckard hangs from a ledge. The painting was deliberately rendered with a limited colour range, as the mattes were shot on a high-contrast film stock that enhanced the colour latitude of the image. The artwork is partially painted onto a large printed photograph of the live-action photography featuring Rutger Hauer and Harrison Ford — this enabled the effects artists to ensure a seamless blend between the painting and the live-action photography. Rotoscope outlines of the characters’ motion through the shot in each frame are also present, again to ensure the artwork was positioned in the exact correct spot. Written on a strip of tape at the top left corner of the board are “FX 96c”, “H=5o” and “V=5o”. The artwork features a black tape border and shows wear to the masonite due to production use and age. The piece was recently cleaned and given an extremely minimal touch-up by uncredited Blade Runner matte artist Rocco Gioffre. The piece remains in fine condition. Dimensions: 204 cm x 97 cm x 0.5 cm (80 ¼” x 38 ¼” x ¼”) Please note this lot is sold without copyright, reproduction rights, licencing agreements or any other type of legal release. £6,000-8,000 A matte painting by Matthew Yuricich from Ridley Scott’s sci-fi classic Blade Runner. Matte painting is one of cinema’s oldest visual-effects techniques, used to extend sets and create scenery for films by means of a painted image rather than a physical set. This matte painting was used for the shot in which the replicant Roy Batty (Rutger Hauer) saved Deckard (Harrison Ford) from falling off a roof. The painting is achieved using acrylic paints on a large sheet of masonite. The board features dark buildings looming over Roy Batty and Deckard, as Deckard hangs from a ledge. The painting was deliberately rendered with a limited colour range, as the mattes were shot on a high-contrast film stock that enhanced the colour latitude of the image. The artwork is partially painted onto a large printed photograph of the live-action photography featuring Rutger Hauer and Harrison Ford — this enabled the effects artists to ensure a seamless blend between the painting and the live-action photography. Rotoscope outlines of the characters’ motion through the shot in each frame are also present, again to ensure the artwork was positioned in the exact correct spot. Written on a strip of tape at the top left corner of the board are “FX 96c”, “H=5o” and “V=5o”. The artwork features a black tape border and shows wear to the masonite due to production use and age. The piece was recently cleaned and given an extremely minimal touch-up by uncredited Blade Runner matte artist Rocco Gioffre. The piece remains in fine condition. Dimensions: 204 cm x 97 cm x 0.5 cm (80 ¼” x 38 ¼” x ¼”) Please note this lot is sold without copyright, reproduction rights, licencing agreements or any other type of legal release. £6,000-8,000 ...
Views: 823 thepropstore
THE TWILIGHT SAGA AUCTION - Villain Costumes Actually Worn in the Films
 
03:33
Register for Prop Store's The Twilight Saga Online Auction (November 6-17, 2017) today: https://propstoreauction.com/view-auctions/info/id/109/ Matt Truex and Brian Cordoba of Prop Store take a look at several villain costumes used in the production of The Twilight saga films available in The Twilight Saga Auction. Sink your fangs into these gorgeous pieces of jewelry at Prop Store's The Twilight Saga Auction today! http://www.twilightsagaauction.com/
Views: 10190 thepropstore
Hallucinating with Will: Props and Effects Pieces from the Hannibal: The Complete Series Auction
 
01:43
Prop Store's GM, Dan, gives Fannibals a look at some of the creepy and cool things that Will Graham hallucinates in the show. All of these items are currently for sale in the Hannibal: The Complete Series Auction hosted at propstore.com
Views: 1142 thepropstore
Batmobile Studio Process Car - Batman Returns
 
01:03
The Batmobile Insert Cockpit used in the making of Tim Burton's 1992 caped crusader sequel, Batman Returns. This piece is a studio process car used by production for interior shots taking place within Batman's spectacular Batmobile. Originally designed by Anton Furst, this process car was designed to help Tim Burton and his team obtain key shots of Batman within the cockpit. By removing the body of the vehicle, the cameras were able to get up close with Batman, the interior electronics, and gadgets within the vehicle. As such, only the interior of the cockpit and the back wall of the car were built for production, while the outer casing seen on the sides were added later to make the piece more presentable. The dashboard inside the Batmobile can be screen matched in numerous scenes and is outfitted with numerous buttons and gauges that light up when powered by a 110 volt battery. While a few small dials and switches are now missing and the CD player and radio have been removed, the monitor screen is still intact. The center console between the seats showcases the original throttle, console lights, and levers, and is framed by original vinyl upholstery. Most recognizable is the original steering wheel with Batman's signature logo in the center. Located over the cockpit is a removable roof, which granted director Tim Burton easy access into the vehicle. While this rare piece remains largely original, a number of components were replaced or added in the years since the film was released. Sometime after production the seats were replaced (see photos) and panels were added to the sides and front of the process car to give the piece a presentable appearance. This piece is in good condition and is believed to be the only item of its kind in existence today. *Please note that due to the size and weight of this item, special shipping arrangements will be required. Please request a quote prior to purchase. 'You either bid on the Prop Store, or stay long enough to see yourself become the watcher', http://www.propstore.com/category/movie-props/
Views: 10272 thepropstore
Lot 116 H. R. Giger - Giger Owned Aluminum Harkonnen “Capo” Chair
 
01:38
A limited edition Harkonnen “Capo” chair created and personally owned by the late H.R. Giger. The Harkonnen chairs were limited to a very short production run, and this particular chair was displayed in Giger's own home as well as in touring exhibitions. Originally conceived as part of the concept development for Alejandro Jodorowsky’s adaptation of Dune, the Capo chair was intended for use by the Baron Harkonnen (Orson Welles was provisionally cast in the role). H.R. Giger was one of the principal concept artists working on the production, however the film’s collapse, due to a spiralling budget, and a new vision by director David Lynch meant Giger’s designs were ultimately unused. Made of aluminium, the Capo Chair is designed to appear as though it is made from human bones, with a spine and a long line of ribs running down the back of the chair, a pelvis above the head and three nose-less skulls adorning the top. Armrests are present at either side, and the four-legged stand allows the seat to rotate. A moulded rubber cushion is fitted into the back for comfort. This particular chair was one of the earliest to be produced (circa mid-1990s) and was acquired directly from Giger. Production of this model of Harkonnen chair has long ceased. The untimely passing of the artist may prevent any further editions of this chair from being produced. The piece remains in very good condition. Dimensions: 80 cm x 70 cm x 195 cm (31½” x 27½” x 76¾”) £60,000-80,000 The Prop Store Live Auction in partnership with Vue Cinemas 378 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 2518 thepropstore
Prop Store's Pacific Rim Online Auction - Mechanical Kaiju Skinmite
 
01:18
A Mechanical Kaiju Skinmite from Guillermo Del Toro’s 2013 mega monster movie Pacific Rim. In the film, a race of monsters, called ‘Kaiju,’ terrorize earth, so humans build a team of massive robots, called ‘Jaegers,’ to battle the monsters and save the world. When Newton Geiszler (Charlie Day) and Hannibal Chau (Ron Perlman) visit the carcass of a fallen Kaiju, this little bug can be seen wiggling and squirming as a scavenger grabs it from the Kaiju skin and places it in a box. This piece is currently on offer only at propstore.com.
Views: 13188 thepropstore
Gremlins 2: The New Batch | Mohawk
 
01:20
From the studios of Rick Baker comes a screen used Gremlins complete animatronic puppet that is for sale at propstore.com For more Gremlin movie memorabilia, check out our official Prop Store website: http://www.propstore.com/products/?keyword=gremlins
Views: 23297 thepropstore
ARRI BL3 35mm Motion Picture Camera
 
02:08
Industrial Light & Magic Owned Camera used on Return of the Jedi For more movie memoribilia check out the official Prop Store website: http://www.propstore.com/
Views: 13051 thepropstore
THE TWILIGHT SAGA AUCTION - Edward Cullen and Bella Swan Costumes
 
01:09
Register for Prop Store's The Twilight Saga Online Auction (November 6-17, 2017) today: https://propstoreauction.com/view-auctions/info/id/109/ Lot 69 & 70 in Prop Store's The Twilight Saga Auction, Bella Swan and Edward Cullen's meadow costumes worn in the production of Catherine Hardwicke's romantic fantasy Twilight. Hop on you little spider monkeys and bid on these costumes today! http://propstoreauction.com/view-auctions/catalog/id/51/lot/12419 http://propstoreauction.com/view-auctions/catalog/id/51/lot/12420 LOT 69 Bella Swan’s meadow costume from Twilight. Bella wore her meadow costume when she confronted Edward in the forest and discovered his true powers. This lot includes a long-sleeve shirt, a brown knit cardigan, a jacket, jeans and a pair of knitted wool mittens. All garments have ‘TW’ written inside with the jacket marked ‘Bella Hero.’ The costume shows minor wear due to production use but remains in good condition. Estimate: $1,500 - $2,000 LOT 70 Edward Cullen’s meadow harness costume from Twilight. Edward wore his peacoat with a button-up shirt and jeans when he revealed to Bella that he was a vampire. This costume consists of a peacoat, a button-up shirt, a pair of jeans and a pair of shoes. The double-breasted peacoat is made of a thick, grey-colored wool with a blue lining. Slits are cut through the back for securing a harness. The button-up shirt is made of blue cotton with thin white pinstripes. Several slits are similarly cut through the back for securing a harness. The jeans are made of black cotton denim. The tennis shoes are black with blue accents and feature a hook and loop fasteners lace cover. All pieces except the coat are marked ‘TW.’ The costume shows minor signs of production wear, such as considerable dirt staining to the shoes but the lot remains in good condition. Estimate: $2,000 - $3,000 Take a bite out of our other items at www.propstore.com
Views: 14800 thepropstore
Lot 330 Star Wars Return of the Jedi - Biker Scout Helmet
 
01:24
An original biker scout helmet made for the production of Richard Marquand’s 1983 classic Star Wars: Return of the Jedi. Biker scout helmets were created for use specifically by the scouts stationed in the Endor forests to guard the force field generator. Designed largely by Nilo Rodis-Jamero, the biker scout or “scooter trooper” helmet is a significant departure from the standard Imperial troops. The Prop Store Live Auction in partnership with Vue Cinemas 375 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 2423 thepropstore
Prop Store - Alien 3 - Pulse Rifle
 
01:05
One of the most famous sci-fi firearms, the M41-A Pulse Rifle was featured heavily in James Cameron's 1986 action sequel ALIENS. Designed by Cameron himself and constructed under the supervision of renowned armorer Simon Atherton at Bapty Armory, the Pulse Rifle is viewed by many as the pinnacle of Sci-Fi prop weaponry. This is an original prop Pulse Rifle that was originally constructed for and used in ALIENS, and later re-built and re-used in ALIEN3. The prop is built around a World War II era M1A1 Thompson submachine gun, which was originally modified to fire blanks for the production and has since been fully decommissioned. The Thompson is fitted with a custom-made pistol grip, and a custom-made extended barrel. A SPAS-12 shotgun cage mounts below the Thompson barrel via a custom-stamped barrel shroud, simulating the grenade launcher. The grenade launcher features the original SPAS-12 pump handle, which was cut down for a different look in the film. It slides freely back and forth, allowing the pump-action loading of the launcher to be simulated. As only one version of the Pulse Rifle had a practical grenade launcher (actually a Remington 870 shotgun) fitted, this piece has a dummy grenade launcher filling the SPAS cage. The ends of the piece are capped with a custom-made steel shoulder stock, and a custom-made aluminum barrel cap at the front of the grenade launcher. The entire assembly is housed in a vacuum-formed ABS outer casing, which completes the unique profile of the prop. While all other components on the piece were used in ALIENS, the casing was installed specifically for the production of ALIEN3. After ALIENS, all of the Pulse Rifle props were struck back to their original firearm components, and most of the casings used were discarded as they were no longer deemed necessary. When the decision was made for Weyland scientists to carry Pulse Rifles during the climax of ALIEN3, BAPTY had to re-assemble the Pulse Rifles and were now lacking the outer casings. New outer casings were therefore manufactured by vacuum-forming over one of the original casings from ALIENS, and the new ABS casing was fitted to the prop with bolts, brackets and custom-riveted plates. The outer casing was originally painted black for use in ALIEN3, as are all Pulse Rifle props in the film, but was later re-sprayed green by BAPTY to return the piece to its classic ALIENS form. The clip base is made from wood and is installed with a screw at the front of the casing. The Pulse Rifle is complete and in good film-used and weathered condition. All of the moveable components-the shoulder stock, grenade launcher pump handle, and original Thompson selector switches and trigger-can be moved and positioned. This is a rare opportunity to own a masterpiece of film prop weaponry. For more 'out of this world' movie memoribilia, check out the official Prop Store website :http://www.propstore.com/category/movie-props/
Views: 7572 thepropstore
Lot 143 The Fifth Element (1997) - Hero ZF-1 Gun
 
00:51
A hero Zorg Industries ZF-1 from Luc Besson'sThe Fifth Element. This model was used for the dart launcher segment of the scene where Jean-Baptiste Emanuel Zorg (Gary Oldman) gave a demonstration to the Mangalores when he tried to exchange the guns for the elemental stones. Built around a machined aluminium core with a plastic pistol grip, the ZF-1 features fibreglass body panels and resin and metal detailing for the prop weapon’s many barrels and deadly prop devices, including poison gas darts, rockets and a nozzle for spraying liquid nitrogen. A yellow button on the left side of the weapon and the red self-destruct button on the right side light up when activated. A length of rubber hose for piping in compressed air and a drawstring trigger, designed with a ring to allow it to be pulled off-screen by one of the film’s armourers, are situated forward of the pistol grip. The ZF-1 is finished in a tan and brown paint finish. The weapon was sympathetically restored by the Prop Store with full details of the restoration available upon inquiry. The piece remains in very good production-used condition. Dimensions: 73 cm x 34 cm x 20 cm (29 ¾” x 13 ½” x 8”) As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. £15,000-20,000 The Prop Store Live Auction in partnership with ODEON and BFI IMAX 471 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 4116 thepropstore
FURY AUCTION Lot 538: Don “Wardaddy” Collier’s (Brad Pitt) Tank Commander Uniform
 
01:01
Don “Wardaddy” Collier’s (Brad Pitt) tank commander uniform from David Ayer’s war drama Fury. Wardaddy wore a tanker uniform throughout the film while commanding Fury. This lot includes Wardaddy’s undershirt, BDU shirt, tanker jacket, gloves, trousers with belt, helmet and personalized satchel. The green thermal undershirt is worn as the base layer and is made of cotton and shows light wear near the cuffs and collar. The green wool BDU shirt (size 17x36) is marked “Wardaddy Double” and features chevrons and unit patches stitched on both arms. The cotton and wool lined brown jacket (size 40R) bears chevron and unit patches stitched to the sleeves and pockets located at either side of the zip-closure. An empty prop Lucky Strike pack remains in the front right pocket. The brown leather gloves have an adjustable strap across the wrist and are labeled in hand-written ink, “Wardaddy Double.” The production mark “double” could mean a double to the principal actor's main costume, or it could mean a stunt or photo double. A pair of green wool trousers (Marked size 34) with production-made patches on the left thigh comes with brown web belt and a pair of green wool socks. Also included is a tanker helmet with headphones and goggles, marked “22 ½.” The helmet shows minor scuffs and scratches as well as the remnants of a black adhesive stuck just beneath the right headphone. The pair of brown leather knee-high boots (Size 11) feature the initials “B.P.” handwritten inside the left and “B.P. Stunt” within the right. The uniform shows light signs of wear and production distress but remains in good overall condition. Dimensions: (Helmet) 9.5” x 8” x 9.5”
Views: 4563 thepropstore
Lot 111 Gladiator - Gladiator’s Minotaur Costume
 
01:30
A gladiator’s minotaur costume from Ridley Scott’s epic drama Gladiator. This massive costume was worn by a gladiator who encountered Maximus (Russell Crowe) during his first arena battle in the Roman province of Zucchabar. The costume includes the minotaur’s oversized headdress with integral fur cloak and tail on the reverse side, body armour, greaves and his distinctive angled aluminium sword. The detailed skull headdress is made from fibreglass and resin with faux rotting flesh made from foam latex. The body armour and greaves are cast in fibreglass and wrapped in faux leather with real, dark brown fur. These pieces include leather straps, enabling them to be tied to the actor. The aluminium sword features an angled blade attached to a wooden grip with a gate-shaped hand guard. With the exception of the sword, each item is labelled for stuntman Forbes Cowan. This costume remains in very good condition. Comes with custom made mannequin. Dimensions: 86 cm x 61 cm x 229 cm (34” x 24” x 90”) £5,000-7,000 The Prop Store Live Auction in partnership with Vue Cinemas 378 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 2475 thepropstore
Prop Store at Comic Con 2014 - Stephen Lane's Booth Tour
 
03:07
Prop Store founder Stephen Lane takes you on a tour of Prop Store's 2014 San Diego Comic Con booth. Stephen elaborates on several pieces to be featured in Prop Store's first Live Auction, taking place at VUE Cinemas in White City London on October 16th. These pieces will also be on exhibit at the same location from October 1st to the 16th. Lot 100 - Complete Mangalore Creature Costum Display & Rifle The Fifth Element (1997) Estimate: £8,000 - £10,000 ($13,700 - $17,100) Lot 27 - Remote Control Batmobile Model Miniature Batman Forever (1995) Estimate: £20,000 - £30,000 ($34,200 - $50,000) Lot 21 - Battle-Damaged Michael Keaton Batsuit & Bat Emblem Batman (1989) Estimate: £10,000 - £15,000 ($17,100 - $25,600)
Views: 1770 thepropstore
Captain America - Hydra Soldier Costume
 
01:13
A Full Hydra Soldier Display and Rifle as seen in Joe Johnston's 2011 super hero action film, Captain America: The First Avenger. In the film, weakling Steve Rodgers (Chris Evans) is enlisted in a top secret military program that turns him into the world's first super hero, Captain America, and the free world's greatest weapon against the deadly Hydra forces. Worn by soldiers of Hydra, an army equipped with the most technologically advanced weaponry in the world, this costume includes the soldiers' trademark rubber and leather helmet which fits on the custom made mannequin with a simple headless look, green felt jacket and pants, black leather gloves and boots, and hard rubber power pack and rifle. The deadly Hydra logo can be found on the found in red on the jacket's left shoulder and sculpted into the power pack's black, rubber belt. Additionally, both the power cels and rifle feature hidden switches that allow them to glow fluorescent blue, a sign of their power deriving from the film's other-worldly Tesseract weapon. The costume is displayed on a custom made mannequin with a custom base featuring the film's logo on the front. The logo can be illuminated by being plugged into the wall with a standard 120 volt plug. All together, this display stands and impressive 78" (198cm) tall and 24" (70cm) wide. The rifle measures approximately 36"x12" (91cm x 31cm) and is easily removable from the mannequin's hands, which have been posed to hold the weapon with ease. Though the clothing features slight wear and scuffing from production all pieces remain in great, production used condition and is ready for display. *Please note, due to the size of this item special shipping will be required. Become a hero today at the official Prop Store website: http://www.propstore.com/
Views: 9177 thepropstore
Small Soldiers - Kip Killigan
 
01:14
An original Commando Elite Figure from the 1996 family film, Small Soldiers. This figure is of Kip Killigan, a cigar smoking commando whose weapon of choice is an over-sized shuriken. His muscular figure is primarily made of resin including his attached ammo belt. Please note that some of his bullets have fallen off and he has only one of his two shurikens (see photos). His bandana and gloves, however, are made of rubber. His arms have also been mismatched. On the back side of Kip Killigan are a number of cut wires that originally powered him and gave the puppeteer control over his movements. While some of the cables are still present, he is not currently animatronic. The soldier comes mounted on a black wooden base. On the front of the stand is the films title logo, which can light up by using a button on the back side of the base. His belt can also light up with the press of a switch. The figure's parts have some wear due to production use (see photos), but he remains in overall good condition and measures approximately 16" x 9" (41cm x 23cm). For more movie memorabilia products, check out our official Prop Store website: http://www.propstore.com/
Views: 29105 thepropstore
STARSHIP TROOPERS - Original Bug Maquettes
 
01:50
PROP STORE'S PHIL TIPPETT AUCTION Lots 414, 431 and 366 from STARSHIP TROOEPRS - Original Bug Maquettes Lots 414 - Hopper Bug Maquette, 431 Warrior Bug Maquette and Tippett Studio Crate, and 366 Brain Bug Maquette. Sculpted by Peter Konig these maquettes are cast in resin and feature stunning paint detail. Each is available in its own seperate lot in the Phil Tippett Auction! Everybody fights, nobody quits. Welcome roughnecks! http://propstoreauction.com/view-auctions/catalog/id/48/
Views: 2529 thepropstore
Lot 371 Underworld Evolution - Selene’s (Kate Beckinsale) Death Dealer Costume
 
01:20
A complete Death Dealer costume worn by Werewolf slayer Selene (Kate Beckinsale) in the Len Wiseman gothic horror film Underworld: Evolution. This is the signature costume worn throughout the movie as Selene fought against the Lycans, the race she believed responsible for killing her family. The skin-tight outfit consists of a black PVC coated Spandex zip-up bodysuit with two buckles at the collar, a black faux leather corset with buckles at the sides featuring lace-up and zip-up back, long black leather boots with buckles and laces, leather wrist guards, a plastic holster that attaches to the outfit via magnets, and finally a stunt pistol prop. The corset is labelled “KB New SM Hero,” and the boots are labelled “KBH2.” No other sizes are marked. The outfit is displayed on a custom-made mannequin form. Dimensions: 36 cm x 50 cm x 178 cm (14" x 19½" x 70") £8,000-10,000 The Prop Store Live Auction in partnership with Vue Cinemas 378 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 13728 thepropstore
Lot 88 The Dark Crystal (1982) - Fizzgig Puppet
 
00:53
A Fizzgig puppet from Frank Oz and Jim Henson’s fantasy film The Dark Crystal. Fizzgig accompanied Jen and Kira on their journey to the Castle of the Crystal to defeat the evil Skeksis. Along with many of the other mythical creatures in the film, Fizzgig was designed by Brian Froud, who later worked again with Henson on Labyrinth. The puppet is made almost entirely of faux-fur lined with cotton netting. It features yellow glass eyes and two small paws made of foam with resin claws and internal wire allowing them to be easily posed. The inside of mouth is made from pink foam with three rows of tiny resin teeth. The puppet is presented on a custom made display stand and besides some minor cracking to the foam on his nose and roof of his mouth as a result of age, the piece remains overall in very good condition. Dimensions: 65 cm x 17 cm x 13 cm (25 ½” x 6 ¾” x 5 ¼”) £8,000-10,000 The Prop Store Live Auction in partnership with ODEON and BFI IMAX 471 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 12944 thepropstore
FURY AUCTION Lot 604: Don “Wardaddy” Collier’s (Brad Pitt) Full Size Body Dummy
 
01:01
Don “Wardaddy” Collier’s (Brad Pitt) full size body dummy from David Ayer’s war drama Fury. Wardaddy is shot several times during the film’s violent climax. This body dummy was likely meant to dress the set after the characters death. This opposable dummy is constructed of a foam rubber core with silicon skin. The dummy has been detailed with severe gunshot wounds on the arm, abdomen, and leg. The dummy’s head is painted to look like Pitt and features hand-punched eyebrows and hair. The figure is dressed in an undershirt, button-up shirt, jacket, gloves, pants, and boots. The figures boots are covered in mud and the clothing is stained with stage blood to match the character in the scene. The dummy shows some wear, such as smudged paint, on the face but remains in overall good, production-distressed condition. Dimensions (seated): 26” x 28” x 60” (66 cm x 71 cm x 152.5 cm) *Please note, due to the size of this item special shipping will be required.
Views: 5953 thepropstore
Lot 344 Star Trek: TNG & Star Trek: Deep Space Nine - Ambassador-Class Starship Model Miniature
 
00:58
A Federation Ambassador-class starship model miniature from the sci-fi television series Star Trek: The Next Generation, later redressed and reused in Star Trek: Deep Space Nine. For The Next Generation, the model served as both the USS Zhukov in the fourth season episode “Data’s Day”, and the USS Excalibur in the fifth season episode “Redemption II”. It was later redressed and used again as the USS Yamaguchi in the Deep Space Nine episode “Emissary”. The starship model is made of resin with internal fibreglass reinforcement and an array of styrene rib detailing running across the hull and nacelles. The shuttle bay at the rear of the ship is exposed revealing internal cabling. The model has a blue and grey paint finish with additional blue and faux gold detailing on the nacelles and deflector dish. White appliqué panels are applied on the saucer as part of the Yamaguchi transformation. Red and black Starfleet decals are applied to the exterior of the vessel. The Excalibur’s registration number “NCC-26517” is applied on the underside of the saucer dish and a decal displaying the name “Excalibur” is applied beneath the shuttle bay. Decals with the number “NCC-26510” and the name “USS Yamaguchi” have been applied across the top of the saucer with “NCC-26510” decals on the port side of the nacelles. Internal lights are fitted across the saucer, hull and nacelles with lights fitted behind transparent red plastic diffusers on the nacelles and the rear of the saucer. Additional lights run through the body of the starship to replicate the look of lit windows, all of which are powered using a cable running from the saucer section of the ship. Well-used in the Star Trek saga, certain decals have come away or show wear from use and age, with the model exhibiting minor cracks and wear to the paint finish. The model is presented on a custom made, poseable display and remains overall in very good condition. The piece was originally sold in CBS-Paramount’s 2006 40 Years of Star Trek auction. Dimensions: 65 cm x 110 cm x 41 cm (25 ½” x 43 ½” x 16 ¼”) As this item contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. £40,000 - 60,000 The Prop Store Live Auction in partnership with ODEON and BFI IMAX 471 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 1584 thepropstore
Lot 248 The Last Samurai (2003) - Katsumoto's (Ken Watanabe) Complete Samurai Costume
 
00:56
Katsumoto's (Ken Watanabe) complete samurai costume from Edward Zwick’s war epic The Last Samurai. Designed to replicate authentic period samurai armour, this costume consists of many separate pieces that are applied in layers to create a complete look. To keep the character distinct, the design of the armour, swords and fabric patterns are specific to Katsumoto, making the various pieces instantly distinguishable from other costumes in the film. The first layer of this costume consists of two tunics, trousers, vest, shoes, thigh guards and sleeve armour. The greaves, body armour, shoulder armour, cloak, belt and helmet are then added, with a sword attached to the belt to complete the look. Many of the pieces are labelled with the character’s name. The retractable SFX sword is unique to Katsumoto’s character with an aluminium blade and was handcrafted by master swordsmith Peter Lyons. Designer Ngila Dickson earned an Academy Award nomination for her work on the film. The retraction mechanism on the sword is no longer functional. The costume includes paperwork directly from the Warner Brothers Archives and comes as a custom display. It remains in exceptional condition. Dimensions (displayed): 50 cm x 65 cm x 215 cm (19 ¾” x 25 ½” x 84 ¾”) As this display base contains electronic components, every effort has been made to describe them accurately; however no guarantee or warranty is made as to functionality, lifespan or safety of those components. It is entirely incumbent on the new owner to satisfy themselves as to their safe use and maintenance. £20,000 - 30,000 The Prop Store Live Auction in partnership with ODEON and BFI IMAX 471 original film props and costumes available at live auction For more info visit www.propstore.com/liveauction
Views: 4353 thepropstore
Piranha 3DD - Super Hero with Cable Controls
 
00:51
This is the Super Hero Silicone Mechanical Piranha from the 2012 horror-comedy sequel, Piranha 3DD. This particular piece was used extensively during filming in the tank scene with Mr. Goodman (Christopher Lloyd) and for the end, "walking fish" shots. Crafted from silicone, this item features a highly detailed, scale painted exterior; with a gradating blue, green and yellow color scheme, as well as red accents around the gills and fins. This item also features a pair of small acrylic green and black eyes and an open mouth filled with pointed silicone teeth. Additionally, a metal rod containing several white cables runs through the fish's center extending 24" (61cm) out the top of the fish. This rod would have been used during filming by a puppeteer to control the fish's movement on screen. Connected to the rod is a single cable control lever, which when manipulated, moves the bottom jaw of the piranha, giving it an added level of realism. The cables extend to two additional control levers that control eye and bottom fin movements. The piranha itself measures approximately 21" x 10" (53cm x 25cm) and features some light wear from production use (see photos) but overall remains in very good condition. Dive into some more movie memorabilia at the official Prop Store website: http://www.propstore.com/
Views: 72894 thepropstore
Lot #120-122 CLOSE ENCOUNTERS OF THE THIRD KIND (1977) - Matthew Yuricich Matte Paintings
 
08:27
A matte painting by Matthew Yuricich from Steven Spielberg’s sci-fi classic Close Encounters of the Third Kind. Matte painting is one of cinema’s oldest visual-effects techniques, used to extend sets and create scenery for films by means of a painted image rather than a physical set. This matte painting was used to create a remarkable cloud formation in the sky behind Devil’s Tower for the scene in which the clouds took on an otherworldly appearance as the Mothership arrived. The painting is achieved using acrylic paints on a large sheet of masonite, and shows a deep blue sky with swirling clouds. A large area is painted grey, where the live-action footage of Devil’s Tower would overlap. A tree is painted on the left side of this massive rock formation. Written at the top left corner of the board is “CN-24”. The artwork shows minor wear to the masonite due to production use and age. The piece was recently cleaned and given an extremely minimal touch-up by assistant matte artist Rocco Gioffre. It remains in fine condition. Dimensions: 203 cm x 96.5 cm x 0.5 cm (80” x 38” x ¼”) Please note this lot is sold without copyright, reproduction rights, licencing agreements or any other type of legal release. £2,000-3,000 Jim Bloom’s personal script from Steven Spielberg's sci-fi classic Close Encounters of the Third Kind. The script was used by second assistant director Bloom, and is filled with his personal notes and amendments. Bound in a blue card cover with brad clips, the revised script is written by Steven Spielberg, with Jim Bloom’s name written on the front cover and title pages. The script comprises 126 pages, with revisions printed single-sided on green, pink, white, gold, and crème-coloured US letter paper. The script displays some marks and wear to the card cover from use. Dimensions: 29 cm x 22 cm x 1.5 cm (11 ¼” x 8 ½” x ¾”) Please note this lot is sold without copyright, reproduction rights, licensing agreements or any other type of legal release. £1,000-1,500
Views: 491 thepropstore
Gremlins 2 - Cable Controlled Hero Gremlin Puppet
 
01:06
Gremlins 2 - Cable Controlled Hero Gremlin Puppet For more official 'monstrous' memorabilia, check out our other selection at the official Prop Store website: http://www.propstore.com/
Views: 61178 thepropstore
Prop Store at Comic Con 2014 - Brandon Alinger's Booth Tour
 
02:55
Prop Store COO Brandon Alinger takes you on a tour of Prop Store's 2014 San Diego Comic Con booth. Brandon elaborates on several pieces to be featured in Prop Store's first Live Auction, taking place at VUE Cinemas in White City London on October 16th. These pieces will also be on exhibit at the same location from October 1st to the 16th. Lot 325 "Blue Harvest" Production Crew Cap Star Wars: Return of the Jedi (1983) Estimate: £400 - £600 ($700 - $1,000) Lot 327 - Jabba the Hutt's Barge Gargoyle Star Wars: Return of the Jedi (1983) Estimate: £1,500 - £2,000 ($2,600 - $3,500) Lot 328 - X-Wing Blocking Shot Miniature Star Wars: Return of the Jedi (1983) Estimate: £2,500 - £3,500 ($4,300 - $6,000) Lot 307 - Death Star Gun Tower Star Wars: A New Hope (1977) Estimate: £ 6,000- £8,000 ($10,300 - $13,700 ) Lot 331 - Death Star Gun Tower Star Wars: Return of the Jedi (1983) Estimate: £ 6,000- £8,000 ($10,300 - $13,700 ) Lot 306 - C-3PO (Anthony Daniels) Costume Hands Star Wars: a New Hope (1977) Estimate: £8,000 - £10,000 ($13,700 - $17,100 ) Lot 320 - Ralph McQuarrie Star Destroyer Bridge Study Painting Star Wars: The Empire Strikes Back (1980) Estimate: £2,000 - £2,500 ($3,500 - $4,300 ) Lot 297 - Viceroy Nute Gunray's (Silas Carson) Silicone Skin Mask Star Wars: The Phantom Menace (1999) Estimate: £6,000 - £8,000 ($10,300 - $13,700 ) Lot 330 - Biker Scout Helmet Star Wars: Returns of the Jedi (1983) Estimate: £8,000 - £10,000 ($13,700 - $17,100 ) Lot 296 - Battle Droid Head Star Wars: The Phantom Menace (1999) Estimate: £3,000 - £5,000 ($5,100 - $8,600 )
Views: 1036 thepropstore

Paper writing service on the
Writing dissertation service
Cover letter for debt collector resume sample
Writing a letter of complaint about service
Vedanta newsletter formats